Traxxas 3355R VXL-3S BRUSHLESS ESC - WATERPROOF

$119.99
Availability: Out of stock
Delivery time: 10 to 14 days

Assembled with Maxx® Cable (12-gauge wire)
This super-flexible, high-current, low-resistance 12-gauge, wire acts like a series of giant pipes, flowing energy in and out of the VXL-3s electronic speed control and into the Velineon 3500 motor. The patented Traxxas Connector combined with Maxx cable is a better engineered solution for extracting all the power your battery has to give.

 

 

Velineon VXL-3s Waterproof Features

  • Patented Traxxas High-Current Connector eliminates a common bottleneck and maintains pure, unrestricted power flow from the battery to the brushless power system.
  • Built-in two-stage low voltage detection for Lithium Polymer (LiPo) battery use provides a clear signal to the driver that the battery pack is nearing its minimum voltage threshold.
  • Widest range of battery options ranging from 4-cell NiMH packs all the way up to 3S LiPo battery packs (11.1 volt)
  • The patented Training Mode™ is an exclusive Traxxas feature that reduces the overall power output of the VXL-3s by 50%, making it easier for new or younger drivers to control their model. When they're ready, simply change profiles to unleash full-throttle action. 
  • The EZ-Set® push-button setup operates and programs just like other Traxxas speed controls such as the XL-5. This eliminates the need to learn a new set of procedures.
  • The VXL-3s is programmable with three drive profiles:
    • Sport Mode – Fwd / Brake / Rev
    • Race Mode – Fwd / Brake
    • Training Mode**™ – 50% Fwd / Brake / 50% Rev
  • Multi-color LED provides clear feedback
  • Two-stage thermal shutdown protection protects the VXL-3s from overheating.
  • Locked Rotor Protection™ prevents system damage by cutting power if the vehicle is stuck or the motor is bound.
  • Battery Over-Voltage Protection™ causes the ESC to go into failsafe mode if the maximum input voltage is exceeded.
  • Water resistent case design uses rubber seals and o-rings to protect against damage caused by water and moisture.
  • Micro-fin aluminum heatsink dissipates heat.
  • The built-in auxiliary fan output powers a snap-on accessory fan for increased cooling capacity during extreme use. A handy clasp on the speed control case keeps the wire neatly in place until you are ready to use it.
  • Gold plated 3.5mm bullet connectors on 12-gauge Maxx® Cable flow full power to the motor without performance strangling resistance.

 

VXL-3s Diagram

VXL-3s WATERPROOF ESC SPECIFICATIONS
Input Voltage:   NiMH 4-9 Cells (4.8 to 10.8 Volts DC);
LiPo 2-3 Cells (7.4 to 11.1 Volts DC)
Case Size:   39mmW x 55mmD x 33mmH
Weight:   90 grams
Motor Limit (Brushless):   No motor limit
On Resistance Forward:   0.00075 Ohms
On Resistance Reverse:   0.00075 Ohms
BEC Voltage:   6.0 V
BEC Current:   2.5A
Power Wire:   12-Gauge Maxx® Cable
Input Harness Wire:   26 Gauge / 100mm
Low Voltage Detection:   2-Stage indicators, switchable (on or off)
Thermal Protection:   2-Stage thermal shutdown
Profile selection:   Sport Mode:
    100% FWD, 100% BRAKES, 100% REV
Race Mode:
    100% FWD, 100% BRAKES, NO REV
Training Mode:*
    50% FWD, 100% BRAKES, 50% REV
Single-Button Setup:   Yes, Traxxas EZ-Set®
Battery Input Connector :   Traxxas High-Current Connector
Motor Types :   Brushless
Ports:   RX Input, auxiliary fan

Compare to:   XL-5   |   VXL-3m

 

Velineon Brushless Power System logo
Part#  Description  
3355R VXL-3s Electronic Speed Control, waterproof (brushless)  
3350R Velineon VXL-3s Brushless Power System, waterproof (includes waterproof VXL-3s ESC and Velineon 3500 motor)  

 

 

Velineon Cooling fan (#3340)
(accessory item, sold separately)

Velineon Cooling fan

The Velineon® VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are neatly routed thanks to the integrated connector clip. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling.

 

 

 
0 stars based on 0 reviews